Broadside Rotor Technology High Efficient Lobe Pump With Machinery Seal
Product Description:
Rotary lobe pumps are positive displacement pumps. The rotation of the lobes creates a vacuum on the suction side, which draws in the pumped medium. The lobes drive the medium along the pump wall into the pressure area. Two to six room fillings are displaced with one drive rotation, depending on the number of rotor blades. This also allows you to dose in proportion to the speed. When the pump is at a standstill, rubber-coated rotors seal off the flow almost entirely and thus ensure that the rotary lobe pump functions smoothly. Lobes without rubber linings, on the other hand, are undersized to reduce friction, so a complete seal is not possible. The design of the pump also makes it insensitive to dry running and allows you to have fully functional pumping regardless of the direction of rotation.
Technical Date:
| Description | Rotary Lobe Pumps |
| EPDM Rubber | NBR Rubber |
| Seal | Cartridge mechanical seal |
| Axial and radial casing protection | XAR500 Hardmetal |
| Drive | Electrical motor |
| Material of pump | GGG25 |
| Pressure | 0 - 2.5 Mpa |
| Flow | 230 - 300 m³/ h |
| Power | 15 - 75 KW |
| Custom printing | Acceptable |
Specifications:
| ACCUVON | rate of flow
l/rev | flow
(m³/h) | pressure
(Mpa) | speed
rpm | Flange diameter
DN mm | power
Kw |
| AC25 | 0.196 | 0.1-7 | 0-1.2 | 10-600 | DN25 | 0.75-5.5 |
| AC50 | 0.392 | 0.2-14 | 0-1.0 | 10-600 | DN50 | 1.1-5.5 |
| AC75 | 0.588 | 0.3-21 | 0-0.6 | 10-600 | DN50 | 1.1-5.5 |
| AP80 | 1.125 | 0.6-400 | 0-1.8 | 10-600 | DN80 | 3-22 |
| AP100 | 1.875 | 1.1-66 | 0-1.4 | 10-600 | DN100 | 3-22 |
| AP120 | 2.864 | 1.7-103 | 0-1.0 | 10-600 | DN100 | 3-22 |
| AP140 | 3.714 | 2.2-133 | 0-0.6 | 10-600 | DN125 | 7.5-22 |
| AF125 | 4.566 | 2.7-164 | 0-1.6 | 10-600 | DN125 | 11-55 |
| AF150 | 6.828 | 4-246 | 0-1.2 | 10-600 | DN150 | 11-55 |
| AF200 | 9.456 | 5.5-340 | 0-0.8 | 10-600 | DN200 | 11-55 |
| AX250 | 12.5 | 7.5-487 | 0-2.5 | 10-650 | DN250 | 22-315 |
| AX300 | 25 | 15-975 | 0-1.0 | 10-650 | DN300 | 30-315 |
| AX350 | 37.5 | 22.5-1463 | 0-0.6 | 10-650 | DN350 | 45-315 |
| AX450 | 50 | 30-1950 | 0-0.4 | 10-650 | DN450 | 55-315 |
| AX350D | 75 | 45-2926 | 0-0.6 | 10-650 | DN350*2 | 90-450 |
| AX450D | 100 | 60-3900 | 0-0.4 | 10-650 | DN450*2 | 110-600 |
Note: Above flange is regular for each model, besides we also offer various flange connection according to your requirements
1. Tested medium in the table: water.
2. Speed, flow rate, electrical power and pressure will be according to different liquid properties.
3. Port size can be changed as needed.
4. ACCUVON reserves the right to change specifications without prior notification.
8 steps for your guideline to select ACCUVON pump
- What medium do you need to pump.
- Product viscosity in pump, line and at rest.
- Solid content and percentage concentration
- Specific gravity
- Capacity required
- Pumping temperature
- Discharge pressure or sketch of pipework system
- Suction pressure or sketch of pipework system
Testing Photo
Product Tags:
|
|
Broadside Rotor Technology High Efficient Lobe Pump With Machinery Seal Images
|
