High Suction Capabilities Duplex Stainless Steel Rotary Lobe Pump
Accuvon Rotary Lobe
Accuvon Rotary Lobe Pumps are self-priming, valveless, positive displacement pumps. They continuously and reliably convey liquids of the most varied consistency as well as multiphase mixtures at speed-proportional flow rates. They have a compact design and pump the medium gently with little pulsation.
Specifications:
| Description | Rotary Lobe Pumps |
| Rotor | 2507 Duplex stainless steel |
| Seal | Double mechanical seal |
| Axial and radial casing protection | High-strength steel , resistant to wear |
| Drive | Variable speed gear motor |
| Material of pump | Full of carbon steel |
| Pressure | 0-1.2 Mpa |
| Flow | 4 - 246 m³/ h |
| Power | 11-55 / KW |
| Custom printing | Acceptable |
Size / Standard unit in mm / inches approx.
| Drive | Weight | Dimensions |
| (kw) | (kg) | L1 (mm) | L2 (mm) | L3 (mm) | L4 (mm) |
| 1.1 | 70 | 780 | 224 | 597 | 581 |
| 1.5 | 81 | 780 | 224 | 597 | 581 |
| 2.2 | 94 | 878 | 245 | 695 | 602 |
| 3 | 98 | 907 | 245 | | |
| 4 | 110 | 930 | 257 | | |
| 5.5 | 131 | 1021 | 276 | | |
| 7.5 | 136 | 1059 | 276 | | |
Advantages
Lobe pump manufacture use high precision 5-axis CNC machining. Our rotor perfectly seal with the inlets and outlets chamber, pump suction ability can reach to 9 meters. The material of the rotor can be selected according to the characteristics of conveying medium. We have many kinds of rotor material for selection, including anti-wear elastomers, hard steel, stainless steel and etc.
Our lobe pumps design is compact, can be installed in extremely limited space. The design of flange and placement of the motor can be adjusted to fit for the customer's space constraints.
Pump body choose inblock casting, the error is minimal. Body material can be cast iron and stainless steel. Chamber inside have replaceable protective liner. The liner surface can be hardened to increase wear resistance.
Our lobe pump is unilateral shaft support design, fluid chamber can be quickly disassemble. Rotors and other accessories can be replaced in a few minutes without remove the pump inlet and outlet pipes. Also lobe pump have few wearing parts, it make lobe pump lower shutdown time and lower using cost.
Very high efficiency, about 60% to 85%.
Lobe pump have wide fluid chamber, no block problem.
- Self-priming and Dry Running
Lobe pump have good self-priming ability, reach to 9.5m, and can allow a certain time dry running.
Quality inspection photos
Product Tags:
|
|
Duplex Stainless Steel Rotary Lobe Pump Wear Resistant High Suction Images
|
